[ntiacnews]Propulsion Boiler NDT RFP

[Chris Coughlin]

Hello All;

Potentially interesting to U.S. NDT service providers, the DOT has a need
for inspection, cleaning and repair of propulsion boilers.  The announcement
follows.

Regards,
Chris

--
Chris Coughlin / NTIAC
415 Crystal Creek Drive / Austin TX 78746
ccoughlin@ntiac.com / http://www.ntiac.com

Issue Date: Wed 16-Oct-2002

Agency: Department of Transportation, Maritime Administration (MARAD), SAR
Acquisition, Office of Acquisition, MRG-7200 7737 Hampton Boulevard,
Building 4D, Room 21, Norfolk, VA, 23505 | VA

Contact: Toni Kimbrough Contracting Officer Phone: (757) 441-3246 Fax: (757)
441-6080 toni.kimbrough@marad.dot.gov

Due: 30-Oct-2002

Title: T/S EMPIRE STATE PROPULSION BOILERS INSPECTION, CLEANING AND REPAIR

Description: SOL: DTMA2B03001 The purpose of the work is to accomplish the
following: thoroughly clean and inspect the waterside and fireside of
boilers; repair leak in port boiler downcomer; locate and by-pass leaking
tube section of port boiler economizer; replace boiler main steam stops and
generator stop valves with government furnished valves; replace
approximately 20 small valves with contractor furnished valves; repair hand
hole plates and seating surfaces; repair boiler casings; repair and replace
selected boiler refractory; locate and repair known tube leaks; NTD
examination of boiler floor tubes; conduct five-year boiler material
condition assessment and evaluation; conduct all tests and inspections of
boilers, mountings and steam piping as required by USCG in 46CFR61.05 -1
through -20 and 46 CR 61.15-1 through-15.